A division of Jordan Andrews London

London’s leading hardwood flooring company

Blanchon Hardwax Oil

From £25.95

Quantity Price inc VAT (per item)
1 £34.95
2 - 4 £29.95
5+ £25.95

Key specifications

  • 1lt
    Size:
  • 3-5 hours*
    Drying Time:
  • BL0021
    Product code:

Add to Basket

Request further information

Request further information

Product information

Blanchon hard wax oil is a finishing oil for internal wood surfaces, it saturates and protects wood against day to day wear and tear. It is made from natural vegetable oils and waxes so it is suitable for worktops as well as flooring and furniture.

 

Suitable for:

  • Solid and engineered floors
  • Traditional and exotic woods
  • Internal wooden furniture and wood panelling
  • Worktops

Golden Oak Blanchon hardwax oil 1lt gives you hard wearing protection for your wooden surfaces.

Click here for more details

Product specifications

  • 1lt
    Size:
  • 3-5 hours*
    Drying Time:
  • 20-25 m2 per litre
    Approximate Coverage:
  • BL0021
    Product code:

Blanchon Hard Wax Oil Installation Guide

 

NO MIXING REQUIRED: Hard Waxoil is ready to use.

Shake well before use.

Do not dilute Hard Waxoil.

Do not apply when the temperature is below 12°C. Only use in well ventilated areas. Do not leave plants and aquariums in contact with the solvent vapours.

Hard Waxoil should always be applied in the direction of the wood grain with a silk brush, graining brush, smooth spatula (not toothed) or short-haired roller. Wipe very regularly as you apply with a clean cotton cloth (in a circular movement), a buffing machine fitted with a soft beige or white pad, or a polishing machine fitted with soft brushes. To make buffing easier, only work on one small area at a time.

The coat applied should be very thin, around 20 to 25 sqm per litre per coat. Buffing (with a cotton cloth, buffing machine) as you apply ensures an attractive, even finish. The wood is deeply penetrated without excess surface residue. Wait 3 to 5 hours before applying the second coat, and proceed as for the first coat.

Special cases:

1- On exotic or oily wood, apply a coat of Prim’oil(1) to prevent any delay in drying which is common with this type of wood. Then apply 2 coats of hard waxoil, immediately polishing each coat using a buffing machine fitted with a beige pad.

2- On parquet floors with “Parquet Joint”, first apply a coat of Prim’oil(1) to seal the joints and then proceed as above.

3- To maximize protection, it is possible to apply one final coat of Hard Waxoil natural or satin (colourless) over two coats of coloured Hard Waxoil. (1)Prim’Oil, based on synthetic resins, does not block wood pores but isolates the fibres, which does not affect

coating with Hard Waxoil. (Please consult the relevant Technical Data Sheet)

 

Blanchon Hard Wax Maintenance Guide

Remove dust regularly from waxed/oiled wood surfaces using a brush or vacuum cleaner.

Stains and marks can be easily removed with a neutral detergent (using damp mops or cloths, never soaking wet ones).

Important: Wait 15 days before the first maintenance treatment to allow Hard Waxoil to fully cure.

PROPERLY MAINTAINED WAXED/OILED WOOD FLOORS LOOK BETTER AND BETTER AS TIME GOES BY.

 

Routine cleaning

Wipe with a damp mop using diluted Blanchon Natural Soap for oiled wood floors (250 ml to 10 litres of water).

Work on one area at a time, rinsing the micro-fibre mop or cloth regularly: it should always be well wrung out to avoid getting the wood floor too wet.

Frequency: from once a week on light-traffic floors to daily cleaning on heavy-traffic floors. Natural Soap For Oiled Wood Floors, which is 100% natural,

is ideal for cleaning waxed/oiled wood floors thoroughly and boosting their protection.

 

Regular maintenance

After ensuring the waxed/oiled floor is clean and dust free, spray Maintenance Oil (using a hand sprayer) and wipe with a clean, dry cotton cloth to

obtain a matt finish.

This operation is quicker and easier with a buffing machine fitted with a beige pad (if the floor is very soiled, a red pad may be used to boost the

mechanical cleaning) or a polishing machine with 3 revolving brushes. This is then similar to a spray method: polishing is quicker and mechanical

cleaning more effective.

Full use of the area: 4 to 8 hours after polishing.

Frequency: When the waxed/oiled wood floor loses its beautiful finish, generally once or twice a month.

On high-traffic wood floors, regular maintenance using the spray method may be boosted by applying a general coat of Hard Waxoil followed by careful

polishing, either with a buffing machine or manually.

The more Maintenance Oil is used, the easier maintenance becomes

Review

Related Products

Frequently Asked Questions

Here you will find a list of our most frequently asked questions

Read More...

Hardwood Flooring Installation

Please take a minute to read this before installing your floor

Read More...