A division of Jordan Andrews London

London’s leading hardwood flooring company

Fiddes Hard Wax Oil - White 1lt

From £26.50

Quantity Price inc VAT (per item)
1+ £26.50

Key specifications

  • 20-24 m2 per litre*
    Approximate Coverage:
  • Roller/Brush/Cloth
    Application Method:
  • FI0015
    Product code:

Add to Basket

Request further information

Request further information

Product information

Fiddes Hard Wax Oil - Colour: White 1lt

 

 Fiddes White hard wax oil gives you a very clean look, it leaves you room like blank canvas that can be accessorised with any colour. 

Fiddes hard wax oil is a blend of natural oils and waxes offering exceptional durability and resistance for internal natural wood flooringkitchen worktops (wood) and areas subjected to a high degree of wear. 

Advantages:

  • Quick drying - 4 to 6 hours
  • Natural satin / Matt water repellent
  • Tread-fast finish that will not peel or flake. 
  • To maintain or renovate, simply wash, buff or re-apply, following the guidelines.
  • Suitable for application onto children’s toys – EN 71-Toy Safety Certification
  • Coverage is around 20 to 24m2 depending on saturation

Resistant to liquids: Tested in accordance with BS 3900 G5

Resistant to wear: Tested in accordance with BS3900 E15

Fiddes hard wax oil is available in 13 colours


 

Product specifications

  • 20-24 m2 per litre*
    Approximate Coverage:
  • Roller/Brush/Cloth
    Application Method:
  • FI0015
    Product code:

Fiddes Hard Wax Oil Safety Sheet

PREPARATION

Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.

APPLICATION

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.

First Coat - Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLEY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.

Second Coat - Apply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit.When the surface area is completely dry, a light buff will further enhance the sheen level.

 

Re-Application- To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

Coverage- A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.

NOTES

  • Ensure all areas to be coated are extremely well ventilated during and after application has occurred.
  • Always test on a small area prior to major application.
  • Certain dense or oily substrates may only require a single application, and subsequently buffed to achieve the desired finish.
  • Longer drying periods may occur during application in cold, damp or humid conditions.
  • Always apply sparingly and remove any excess product thoroughly.

Review

Related Products

Frequently Asked Questions

Here you will find a list of our most frequently asked questions

Read More...

Hardwood Flooring Installation

Please take a minute to read this before installing your floor

Read More...